Course Outline Overview OF Electrical AutoCAD
- Discussion about why need to drawing AutoCAD Electrical.
- Over view of AutoCAD Electrical version software.
- (a) Using Grid, Grid snap & snap commands.
(b) Using Ortho Mode & Polar Tracking Mode.
© Using Fillet & Offset commands.
- (a) Using point, Line, Xline, Ray, spline, circle commands.
(b) Using ARC, Ellipse, Rectangle, polygon, Solid, Donut, Polyline commands.
- (a) How to Create a New project file.
(b) How to add your project file in project Manager.
- (a) Introduction to Icon menu.
(b) Introduction to circuit Builder.
© Using Cut, Copy, Past, Move commands.
(d) Insert wire & wire Number.
- (a) How to build a symbol.
(b) How to add your symbol in Icon menu.
- How to Draw a selling Fan Icon using simple commands.
- (a) What is PLC?
(b) Introduction to PLC Symbols.
© How to create a Ladder Diagram.
(d) How to Insert a Ladder Diagram.
- (a) How to using OSNAP.
(b) How to draw with End point, Mid point, Center, Quadrant, Extension, Perpendicular, Tangent, Near Cast.
- (a) How to Inserting a Ladder.
(b) How to Renumbering Ladder Reference.
© How to Resizing a Ladder.
(d) How to change Rung Spacing.
- (a) How to adding a Rung.
(b) How to X-Y Grid Setup.
© How to X-Zone Setup.
(d) How to draw a simple DOL Project.
- (a) How to draw a Table.
(b) Discussion about Electrical Drawing.
© Discussion about complete DOL Starter Project.
- (a) How to Inserting Parametric PLC.
(b) How to Inserting Full units PLC.
© How to read a Parametic PLC.
(d) How to read a Full Units PLC.
- (a) How to Editing & Modifying Parametric PLC.
(b) How to Editing & Modifying Full Units PLC.
© How to Add I/O with PLC.
(d) How to use different wire color & type.
- (a) How to workspace switching.
(b) How to file Tab Hide/Show.
© How to command promote Area Hide/Show.
- (a) How to changing Line type & Line color.
(b) How to Insert a Table & Text.
- (a) How to convert DWG to PDF.
(b) How to convert DWG to JPG/PNG.
- (a) How to Units Setup.
(b) How to Limit Setup.
© How to Dimension Setup.
- (a) What is Reports Generator Dialog Box?
(b) How to changing Reports Formats.
© How to placing Reports in the Drawing.
(d) How to Saving Reports file.
(e) How to Editing a Report.
- How to Draw “Forward/Reverse direction control of a 3 phase Motor diagram” Using AutoCAD Electrical.
- (a) How to draw a single line diagram.
(b) What is Transmission & Distribution.
© What is Sub-Station.
(d) Why need to using different kinds of Voltage.
- How to drawing Electrical lighting plan.
- How to draw a single line diagram of 11kV/230V Using AutoCAD Electrical Drawing.
- How to Dynamic (DYN) Settings.
